| Thickness: | 25-45 Microns |
| Working Temperature: | 170-180℃ |
| Package: | Carton, Pallet |
| Width: | 1000-2200 Mm |
| Length: | 500-1500 M/roll |
| Material: | PVOH (polyvinyl Alcohol) |
| Usage: | Release Film |
| High Light: | Cold water soluble film, polyvinyl alcohol film |
The PVA film can be used as an excellent release material for unsaturated polyester, epoxy resin, or other thermosetting resin parts.
It has the following characteristics:
Good releasing performance, it barely produces any blanks, which saves polishing time.
With high flexibility and smoothness, the PVOH film can fit the mold better, and the demolding quality is higher.
Good heat resistance: the film can be heated up to 190 degrees.
Good mechanical performance: high tensile strength and high breaking elongation rate.
Suitable for continuous production, high producing efficiency.
Main Specification and Parameters :
| Category | Parameter | Remark |
| Thickness | 25μm~45μm | |
| Width | 1000mm~2000mm | |
| Length | Regular standard: 1000m
Max length: 1500m | Refer to products with 40μm thickness |
| Weight | Around 65kg per roll | Refer to products with 40μm thickness and 1200m length |
| Paper tube | 3 or 6 inches | |
| Transmittance | 80°~90°(%) | |
| Maximum temperature endurance | 170ºC-180ºC | |
| Water soluble temperature | Normal Temp Type | Under indoor Temperature | Solution rate is in proportion to water temperature. |
| Medium Temp Type | Over 40ºC |
| High Temp Type | Over 80ºC |
| Output | Delivery 7~10 days after ordered (normal standard and quantity) | |
